CoQ10 Gummies: Keeping an Oil-Soluble Active Alive

CoQ10 oxidises, photographs badly and does not dissolve in a gummy cook. We load it as a spray-dried powder, protect it with an antioxidant system and a nitrogen flush, and assay the finished piece by HPLC.

25-50 mg
CoQ10 per piece
4-6 Weeks
Production lead time
3,000 Units
Minimum per SKU
CoQ10 Gummies: Keeping an Oil-Soluble Active Alive

Why CoQ10 Is Awkward in a Chew

CoQ10 is fat-soluble and crystalline. In a softgel it sits in an oil carrier and behaves; in a water-based gummy cook it has nowhere to go, so it is normally supplied as a spray-dried or water-dispersible powder at 10-20% CoQ10 on a carrier.

That carrier sets the practical load. At 20% potency, a 25 mg dose means 125 mg of powder in the piece, and a 4-5 g gummy can carry roughly 25-50 mg of CoQ10 before the texture and the orange colour become the limiting factor.

Oxidation is the second problem. CoQ10 is sensitive to light, heat and oxygen, and the degradation shows up as a shift in colour and a falling assay. Antioxidant protection in the formula, a nitrogen flush before packing and an opaque pack all extend the shelf life meaningfully.

Ubiquinol is the reduced form and is more sensitive still. It can be done, but the process window is narrower and the cost per milligram is higher, so we usually recommend ubiquinone unless the brief specifically calls for ubiquinol.

What Our CoQ10 Gummy Line Covers

Form Selection
Ubiquinone for cost and stability, ubiquinol where the brief requires the reduced form, with the process window explained up front.
Dispersible Powder Handling
Spray-dried CoQ10 at 10-20% potency, pre-dispersed before it meets the cook so it does not speckle the batch.
Oxidation Control
Antioxidant system, nitrogen flush and opaque packaging specified together, because any one of the three alone is not enough.
HPLC Assay
CoQ10 measured on the finished gummy, with degradation tracked across accelerated stability.

CoQ10 Gummy Capability

ParameterRangeNotes
CoQ1025-50 mg per gummy50-100 mg per 2-piece serving
FormUbiquinone, ubiquinolUbiquinol needs a tighter process window
Powder potency10-20% on carrierDose drives the powder weight
Gummy weight4-5.5 gHeavier piece for higher load
BasePectin, gelatin, sugar-free polyolPectin suits vegan positioning
Batch size50,000-2,000,000 gummiesPilot runs from 3,000 units

From Brief to Finished CoQ10 Gummy

01
Form and Dose Plan
Ubiquinone or ubiquinol, milligrams per serving and the powder potency that delivers it.
02
Dispersion Trial
The powder is pre-dispersed and tested for speckling, colour and settle before the cook is scaled.
03
Base Trial
Pectin and gelatin bases are compared at the real load for chew, set and colour.
04
Pilot Batch
A small run checks deposit weight, CoQ10 content and colour across the batch.
05
Stability
Samples are held at 25 °C and 40 °C with assay and colour read at intervals.
06
Production and Packing
Cooking, depositing, curing, polishing, metal detection, nitrogen flush and opaque packing.

Quality Control for CoQ10 Gummies

CoQ10 is assayed by HPLC on the finished gummy, and the result is tracked against colour because degradation shows visually first. A piece that has drifted from amber to brown is already losing assay even if the batch composite still passes.

The plant operates under GMP with ISO 9001, ISO 22000 and HACCP controls and is registered with the US FDA as a food facility. Light and oxygen exposure are controlled at packing, and the packaging specification is part of the stability protocol rather than an afterthought.

GMPISO 9001ISO 22000HACCPFDA-registered facilityHalal

CoQ10 Gummy FAQ

How much CoQ10 fits in one gummy?+
25-50 mg in a 4-5.5 g piece, so a two-piece serving delivers 50-100 mg. The limit is the carrier powder weight and the colour, not the solubility alone.
Ubiquinone or ubiquinol?+
Ubiquinone is more stable and cheaper per milligram and suits most briefs. Ubiquinol is the reduced form and is more oxidation-sensitive, so the process window and the pack have to be tighter.
Will the CoQ10 stay stable through shelf life?+
With an antioxidant system, a nitrogen flush and an opaque pack, yes within a normal 18-24 month window. Without those three, assay loss and colour drift appear early.
Why do CoQ10 gummies turn brown?+
Oxidation. The colour shift is the visible sign of the same process that drops the assay, which is why we track both together in stability.
Can CoQ10 gummies be vegan?+
Yes, with a pectin base. CoQ10 itself is produced by fermentation, so the base is the only animal-input question in the formula.
Can you combine CoQ10 with vitamin E or omega-3?+
Yes, and both are common. Vitamin E adds antioxidant protection; omega-3 changes the emulsion and needs its own stability work.
What is the minimum order?+
3,000 finished units per SKU for a pilot. Volume pricing starts at 50,000 gummies per batch.
How long does production take?+
Four to six weeks after artwork and materials are approved, plus seven to ten days for samples at the start.

Send Your CoQ10 Gummy Brief

Tell us the form, the milligrams per serving and the pack you intend to use. We will confirm the powder potency, the protection system and the stability scope.

Related Pages