Sugar-Free Gummies That Hold Their Texture and Their Claim

Remove sugar and the water activity, texture and shelf life all move. We build sugar-free gummy systems with erythritol, allulose or maltitol and control the variables that actually decide whether the product survives a year on a shelf.

0 g
Added sugar per serving
0.50-0.60
Target water activity
3,000 Units
Minimum per SKU
Sugar-Free Gummies That Hold Their Texture and Their Claim

Why Sugar-Free Gummies Are a Different Formulation Problem

Sugar is not only sweetness in a gummy. It binds water, controls water activity, feeds the gel network and gives the chew its body. Take it out and three things happen at once: water activity rises and the product becomes vulnerable to mould, the gel sets weaker or too firm depending on the system, and the sweetener itself starts to crystallise or release off-notes during storage.

The sweetener choice drives everything else. Maltitol is closest to sucrose in behaviour but carries a measurable laxative load above roughly 20-25 g per serving, which rules it out for products eaten three or four times a day. Erythritol gives a clean label and low laxative effect but crystallises readily and has a cooling effect. Allulose behaves closest to sugar in browning and texture, is expensive, and its regulatory status differs between markets.

We select the system against the claim, the dose and the market, then control water activity, pH and curing rather than relying on preservatives. For sugar-free vitamin gummies with a high mineral load, that control is the difference between a product that passes stability and one that sweats in the bottle.

Sugar-Free Gummy Capability

Four Sweetener Systems
Erythritol and stevia for a clean zero-calorie label, allulose for sugar-like texture and browning, maltitol for cost-driven volume, and polydextrose or soluble fibre where a fibre claim helps.
Water Activity Control
Sugar-free gummies are targeted at 0.50-0.60 water activity, with curing time, drying room humidity and packaging dew point managed to keep them there through shelf life.
Crystallisation and Bloom Prevention
Seeding, crystal inhibitors and coating systems are used to stop the white bloom and gritty texture that erythritol and maltitol systems develop when the storage temperature swings.
Laxative Load Calculation
We calculate the sugar alcohol load per serving and per day so the product stays under the threshold that triggers digestive discomfort, especially for multi-serve products.
Tooth-Friendly and Diabetic Positioning
Formulations built for sugar-free, no-added-sugar or tooth-friendly claims, with the wording checked against the rules of the destination market before printing.
Preservative-Free Options
Where water activity and pH are controlled tightly enough, sorbate and benzoate can be dropped, which matters for clean-label positioning.

Sugar-Free Gummy Parameters

ParameterRangeNotes
Sweetener systemErythritol, allulose, maltitol, xylitol, polydextroseSingle or blended
Water activity0.50-0.60 awVerified per batch
Gummy weight2-5 gStandard moulds or custom
BasePectin, gelatin, modified starchPectin for vegan
Sugar per serving< 0.5 gMeets zero-sugar labelling in US and EU
Batch size50,000-2,000,000 gummiesPilot from 3,000 units
Shelf life12-18 monthsSupported by stability data
Lead time4-6 weeksAfter artwork and material approval

From Sugar-Free Brief to Finished Batch

01
Claim and Market Review
We confirm which sugar claim you can legally make in each target market before the formula is fixed.
02
Sweetener Screening
Two or three systems are tasted and texture-tested against your flavour profile and cost target.
03
Water Activity Design
Cook solids, curing conditions and packaging are set to hit the target aw and hold it.
04
Trial Batch and Stability
A pilot batch goes into accelerated stability for texture, bloom, colour and micro.
05
Production
Deposition, curing, polishing and metal detection under GMP controls.
06
Packing and Release
Moisture-barrier packaging, batch testing and certificate of analysis.

What We Test on a Sugar-Free Gummy

Every batch is checked for water activity, sugar alcohol profile, microbiological limits, heavy metals and, where relevant, the active dose. Water activity is the number that predicts whether the product will mould or sweat in a warehouse, so it is measured on the finished gummy, not inferred from the cook.

Stability runs at 25 °C and 40 °C track texture, colour and bloom over time. Packaging is chosen with the moisture barrier in mind, because a sugar-free gummy in a poor barrier film will pick up humidity faster than the same product with sugar.

GMPISO 22000HACCPFDA-registered facilityHalalThird-party lab testing

Sugar-Free Gummy FAQ

Which sweetener is best for a sugar-free gummy?+
There is no single answer. Allulose gives the closest texture to sugar, erythritol gives the cleanest label, and maltitol gives the lowest cost. The right choice depends on the claim, the serving size and the market.
Do sugar-free gummies cause digestive issues?+
Sugar alcohols can. Maltitol is the main offender above roughly 20-25 g per serving. Erythritol and allulose are tolerated better, and we calculate the load per serving before recommending a system.
Will the gummies crystallise or bloom?+
They can, especially erythritol systems under temperature cycling. We use crystal inhibitors, controlled curing and polishing to prevent it, and verify in stability.
Can sugar-free gummies be preservative-free?+
Yes, when water activity is held at 0.60 or below and pH is controlled. That combination is what prevents mould without sorbate or benzoate.
Are they suitable for diabetics?+
Sugar-free does not automatically mean diabetic-friendly, because some sugar alcohols still affect blood glucose and the product may contain other carbohydrates. We can formulate to a low glycemic target and provide the nutrition data you need for the claim.
Can you make sugar-free gummies with vitamins?+
Yes, including high-dose vitamin C, B-complex and zinc. Mineral load affects taste and water activity, so the formula is adjusted rather than copied from a sugar version.
What is the minimum order?+
3,000 units per SKU for a pilot, with volume pricing from 50,000 gummies per batch.
How long is the shelf life?+
Twelve to eighteen months in moisture-barrier packaging, confirmed by stability data for your specific system.

Send Your Sugar-Free Gummy Brief

Tell us the active, the claim you need and the market you are selling into. We will propose a sweetener system, confirm the water activity target and quote with stability testing included.

Related Pages