L-Theanine Gummies for a Calm Brief, Not a Sedative One

L-theanine is one of the easier actives to carry: stable, water-soluble and only mildly savoury. The work is in the dose per piece, the pairing with magnesium or GABA, and the claims you can actually put on the pack.

100-200 mg
L-Theanine per serving
4-6 Weeks
Production lead time
3,000 Units
Minimum per SKU
L-Theanine Gummies for a Calm Brief, Not a Sedative One

What Makes L-Theanine Easy, and What Does Not

L-theanine is water-soluble, heat-stable in a normal gummy cook and has a mild umami taste rather than a bitter one. That makes it one of the few actives that can go into a gummy at a full 100-200 mg serving without a masking system doing all the work.

The first constraint is piece size. At 100 mg per piece, a 4 g gummy carries a sensible dose; higher serving claims are usually met with two pieces. Beyond that the powder starts to affect the set and the savoury note becomes noticeable next to delicate fruit flavours.

The second is the pairing. Magnesium, GABA, glycine and melatonin are common companions, and each changes the brief: magnesium adds a chalky note and a buffering requirement, GABA adds its own savoury taste, melatonin needs a low-dose uniformity plan because the active is measured in fractions of a milligram.

The third is claims. L-theanine is sold on relaxation and focus language, and those claims are handled differently in the US, the EU and Asia. We manufacture and assay to the specification; the wording on the pack is your regulatory decision.

What Our L-Theanine Gummy Line Covers

Dose per Piece
50-100 mg per gummy, with a two-piece serving to reach 200 mg without an oversized or savoury piece.
Pairing Options
Magnesium citrate or glycinate, GABA, glycine and low-dose melatonin combinations, each with its own taste and assay plan.
Clean Flavour Base
Light citrus, berry and peach systems that do not fight the umami note at the real load.
HPLC Assay
L-theanine measured on the finished gummy, with uniformity checked across the batch.

L-Theanine Gummy Capability

ParameterRangeNotes
L-theanine50-100 mg per gummy100-200 mg per 2-piece serving
Gummy weight3.5-5 gSmaller piece suits delicate flavours
BasePectin, gelatin, sugar-free polyolPectin for vegan positioning
PairingsMagnesium, GABA, glycine, melatoninEach extends the assay scope
AssayHPLC on finished pieceUniformity checked per batch
Batch size50,000-2,000,000 gummiesPilot runs from 3,000 units

From Brief to Finished L-Theanine Gummy

01
Dose and Pairing Plan
We fix the milligrams per serving and which companion actives, if any, go into the same piece.
02
Taste Trial
Flavour systems are tested against the umami note at the real load, not at a bench dilution.
03
Base Trial
Pectin and gelatin are compared for chew, set and colour retention.
04
Pilot Batch
A small run checks deposit weight, theanine content and uniformity across the batch.
05
Stability
Samples are held at 25 °C and 40 °C to confirm assay and colour over shelf life.
06
Production and Packing
Cooking, depositing, curing, polishing, metal detection, then packing to your artwork.

Quality Control for L-Theanine Gummies

L-theanine is assayed by HPLC on the finished gummy. Where melatonin is part of the same piece, that assay runs separately and at a much lower detection range, because a fraction of a milligram needs its own method and its own uniformity check.

The plant operates under GMP with ISO 9001, ISO 22000 and HACCP controls and is registered with the US FDA as a food facility. Heavy metals and microbiological testing are run per batch, with third-party verification available on request.

GMPISO 9001ISO 22000HACCPFDA-registered facilityHalal

L-Theanine Gummy FAQ

How much L-theanine fits in one gummy?+
50-100 mg in a 3.5-5 g piece, so a two-piece serving delivers 100-200 mg. It carries more easily than most actives because it is stable and only mildly savoury.
Does L-theanine taste bad?+
Mildly umami, similar to a weak green tea. At 100 mg per piece a light citrus or peach base covers it; at higher loads the savoury note starts to show through delicate flavours.
Can you combine it with magnesium or GABA?+
Yes, and both are common. Magnesium adds a chalky note and needs buffering, GABA adds its own savoury taste, and each addition extends the assay scope.
Can melatonin go in the same gummy?+
Yes, at a low dose. Melatonin is measured in fractions of a milligram, so it needs a separate assay method and a tighter uniformity check than the theanine.
Is L-theanine stable in a gummy?+
Yes. It survives a standard cook and shows little loss over shelf life, which is one reason it suits a chew better than many botanicals.
Can these gummies be sugar-free?+
Yes, with pectin and a polyol system. The polyol cooling effect actually works in favour of a calm, clean flavour profile.
What is the minimum order?+
3,000 finished units per SKU for a pilot. Volume pricing starts at 50,000 gummies per batch.
How long does production take?+
Four to six weeks after artwork and materials are approved, plus seven to ten days for samples at the start.

Send Your L-Theanine Gummy Brief

Tell us the milligrams per serving, the companion actives and the flavour direction. We will confirm the per-piece load, the masking approach and the assay scope.

Related Pages