NAD+ Gummies Where Stability Decides the Format

Nicotinamide riboside and NMN are both water-soluble and both degrade in a wet matrix. A gummy can work, but only at low water activity with a moisture barrier and an assay that proves what is left at end of shelf life.

150-500 mg
NR or NMN per serving
4-6 Weeks
Production lead time
3,000 Units
Minimum per SKU
NAD+ Gummies Where Stability Decides the Format

The Chemistry Sets the Rules

Nicotinamide riboside chloride is hygroscopic and hydrolyses in the presence of water, cleaving to nicotinamide and ribose. NMN is more stable as a dry powder but converts to nicotinamide under heat and moisture. Both behave well in a capsule and badly in a wet cook, which is why this category is dominated by capsules and powders.

A gummy is still possible. The levers are water activity below 0.5, a shorter cook with the active added at the coolest workable point, a sugar-free polyol base rather than a sugar syrup, and a pack with an aluminium barrier and a desiccant where the market allows it.

Dose matters too. NR is studied at 150-300 mg and NMN at 250-500 mg, which is 300-1,000 mg per serving across two pieces. That load is physically fine in a 4 g piece; the problem is entirely stability, not size.

Claims are where brands get into trouble. NAD+ language sits on the edge of drug claims in several markets, and we will not print anything that states a disease or ageing outcome. What is on the pack is the brand's regulatory decision.

What Our NAD+ Gummy Line Covers

NR and NMN Options
Nicotinamide riboside chloride at 150-300 mg or NMN at 250-500 mg per serving, added at the coolest workable point.
Low Water Activity
Sugar-free polyol bases held below 0.5 water activity, which is the single biggest factor in retained assay.
Barrier Packing
Aluminium foil pouches or high-barrier bottles with desiccant, specified with the formula rather than after.
End-of-Life Assay
The declared dose is set from accelerated and real-time data, so the overage is calculated rather than guessed.

NAD+ Gummy Capability

ParameterRangeNotes
Nicotinamide riboside150-300 mg per servingChloride salt, hygroscopic
NMN250-500 mg per servingHeat and moisture sensitive
Water activity≤0.5Primary stability lever
BaseSugar-free polyol, pectinNo sugar syrup
Gummy weight3.5-4.5 gTwo pieces per serving
Batch size50,000-2,000,000 gummiesPilot runs from 3,000 units

From Brief to Finished NAD+ Gummy

01
Stability Brief
We agree the target shelf life and the pack barrier before the formula, because both decide the dose.
02
Base Trial
Sugar-free polyol and pectin ratios are tested for water activity and set at low moisture.
03
Cool Addition
The active is dosed into the mass at the lowest temperature that still deposits cleanly.
04
Pilot Batch
A small run checks deposit weight, assay and water activity on the finished piece.
05
Accelerated Stability
Samples are held at 40 °C and 75% RH to measure degradation before the label dose is fixed.
06
Production and Packing
Cooking, depositing, curing, polishing, metal detection, then packing into barrier material.

Quality Control for NAD+ Gummies

NR and NMN are assayed by HPLC on the finished gummy, with nicotinamide measured as the degradation marker so the loss is quantified rather than assumed. Water activity is checked per batch, because a batch outside the target loses assay faster than the label allows for.

The plant operates under GMP with ISO 9001, ISO 22000 and HACCP controls and is registered with the US FDA as a food facility. Heavy metals and microbiological testing run per batch, with third-party verification available.

GMPISO 9001ISO 22000HACCPFDA-registered facilityHalal

NAD+ Gummy FAQ

Is a gummy a good format for NR or NMN?+
It is a workable format, not the easiest one. Both actives are water-soluble and degrade in a wet matrix, so the gummy has to run at low water activity with barrier packing. Capsules remain simpler.
What dose per serving?+
NR at 150-300 mg and NMN at 250-500 mg, so 300-1,000 mg per two-piece serving. The load fits; the constraint is what survives shelf life.
How do you keep the assay up?+
Four levers: water activity below 0.5, addition at the coolest workable point, a sugar-free polyol base, and an aluminium barrier pack with desiccant where permitted.
Will you print anti-ageing claims?+
No. NAD+ wording sits close to drug claims in several markets. We manufacture and assay; the claim set is the brand's decision and its regulatory risk.
Can NMN and NR be combined?+
They can, but there is little formulation reason to. Each has its own assay and its own degradation pathway, so a combined piece doubles the analytical work.
Is a sugar-free base better here?+
Yes. Sugar syrup raises water activity, and water activity is the main driver of NR and NMN loss. A polyol base also keeps the calorie story clean.
What is the minimum order?+
3,000 finished units per SKU for a pilot. Volume pricing starts at 50,000 gummies per batch.
How long does production take?+
Four to six weeks after artwork and materials are approved, plus seven to ten days for samples at the start.

Send Your NAD+ Gummy Brief

Tell us the active, the dose per serving and the shelf life you need to claim. We will confirm the water activity target, the pack barrier and the overage the data supports.

Related Pages