Prenatal Gummies Built Around the Two-Piece Serving

Almost every prenatal gummy on the shelf is iron-free, and that is not a marketing choice: iron in a fruit-flavoured chew tastes like rust and oxidises the colour. We formulate around what a gummy can carry — folate, DHA, choline, iodine, D3 — and are explicit about what it cannot.

2 Pieces
Standard serving
400-800 mcg
Folate DFE per serving
3,000 Units
Minimum per SKU
Prenatal Gummies Built Around the Two-Piece Serving

What a Prenatal Gummy Can and Cannot Deliver

The prenatal label is the most scrutinised in the category, and the gummy format constrains it in specific ways. A 3 g piece holds roughly 1 g of active solids before texture collapses, so a two-piece serving gives you about 2 g to work with. Folate at 400-800 mcg DFE, choline at 450 mg and DHA at 200-300 mg do not all fit in 2 g, which is why brands choose: folate plus D3 plus iodine in the gummy, DHA as a separate softgel or a choline-DHA blend at a lower dose.

Iron is the classic exclusion. Ferrous bisglycinate is better tolerated than ferrous sulfate but still carries a metallic note and catalyses colour drift in berry systems. If your label must show iron, we would rather quote a tablet or a capsule than sell you a gummy that fails sensory at month three.

The rest of the work is stability. Methylfolate is heat-sensitive and loses potency at deposit temperature, so we either use a coated grade, overage the input against finished-piece assay, or run a lower-temperature pectin base. Every option has a cost, and we price them separately so you can decide.

What Our Prenatal Gummy Line Covers

Folate Form Selection
Folic acid for cost and label familiarity, L-5-MTHF (methylfolate) for the active form. Coated grades where the deposit temperature would otherwise destroy potency.
DHA Inclusion
Algal DHA powder or a microencapsulated emulsion, dosed at 100-200 mg per serving with peroxide value checked on the finished piece, not just the incoming oil.
Iron-Free by Design
We state the exclusion up front and help you move iron to a companion product, so the gummy keeps its sensory profile through shelf life.
Serving and Sugar Strategy
Two pieces of 2.5-3 g keep sugar at 1.5-2 g per piece. Reduced-sugar polyol systems are available but are tested for laxative load, which matters in pregnancy.

Prenatal Gummy Capability

ParameterRangeNotes
Serving size2 gummies2.5-3 g per piece
Folate400-800 mcg DFEFolic acid or L-5-MTHF
Vitamin D3400-1,000 IUPowder or emulsified
Iodine150 mcgPotassium iodide, added post-cook
Choline50-100 mg per servingHigher doses need a bitartrate grade with taste masking
Batch size50,000-2,000,000 gummiesPilot runs from 3,000 units

From Brief to Finished Prenatal Gummy

01
Label and Dosage Review
We check the nutrient list against the serving size before formulation, because the two-piece limit decides what is feasible.
02
Base and Taste Trial
Pectin or gelatin, berry or citrus, with the folate and iodine added at the stage that protects them.
03
Pilot Batch
A small run measures deposit weight, folate assay after cure and colour stability.
04
Stability
Samples at 25 °C and 40 °C, assayed at 0, 1, 3 and 6 months for folate, D3 and DHA.
05
Production
Cooking, depositing, curing and polishing under GMP, with metal detection on every lot.
06
Testing and Packing
Finished-piece assay, micro and heavy metals, then packing to your artwork with a child-aware closure if required.

Quality Control Specific to Prenatal Gummies

Three checks decide whether a prenatal gummy survives its shelf life: folate assay on the finished piece rather than the input, DHA peroxide value after curing, and colour drift across the six-month point. Folate losses of 15-30% through the cook are normal, which is why the overage has to be calculated from measured data instead of a rule of thumb.

The plant runs GMP with ISO 9001, ISO 22000 and HACCP, is registered with the US FDA as a food facility, and holds Halal certification. Third-party laboratory verification of the finished label claim is available for every batch.

GMPISO 9001ISO 22000HACCPFDA-registered facilityHalal

Prenatal Gummy FAQ

Why do prenatal gummies contain no iron?+
Iron tastes metallic in a fruit chew and accelerates colour and flavour oxidation. Most brands put iron in a separate tablet or softgel and keep the gummy iron-free; we recommend the same split rather than forcing iron into the base.
Folic acid or methylfolate?+
Folic acid is cheaper and the form most labels recognise. L-5-MTHF is the active form and is preferred by brands targeting MTHFR variants, but it is heat-sensitive and costs more, so it needs a coated grade or a measured overage.
Can a prenatal gummy carry DHA?+
Yes at 100-200 mg per serving using algal oil powder or a microencapsulated emulsion. Above that the fishy note and the oil load start to affect texture, and a separate softgel is the better answer.
How much sugar is in a prenatal gummy?+
Typically 1.5-2 g per piece, or 3-4 g per two-piece serving. Reduced-sugar versions use polyols, which we test for laxative load because gastrointestinal tolerance changes during pregnancy.
Does choline fit in a gummy?+
50-100 mg per serving is workable with a bitartrate grade and masking. The 450 mg pregnancy target does not fit, so most brands combine a lower gummy dose with dietary choline.
What testing comes with the batch?+
Finished-piece assay for the declared vitamins, micro and heavy metals, water activity, and a certificate of analysis per lot. Third-party verification is available on request.
What is the minimum order?+
3,000 finished units per SKU for a pilot, with volume pricing from 50,000 gummies per batch.
How long does production take?+
Four to six weeks after artwork and materials are approved, plus seven to ten days for samples.

Send Your Prenatal Gummy Brief

Tell us the nutrient list, the serving size you want on the label and whether DHA stays in the gummy or moves to a companion product. We will confirm what fits in two pieces and quote accordingly.

Related Pages