Multivitamin Manufacturer: Choose the Form, Then the Label

ZOOMSHEAL is the export brand of Zhongci Health Products Technology Development Co., Ltd., a contract multivitamin manufacturer in Guangzhou with 23 years of experience. We make tablets, hard capsules, gummies and powder stick packs in-house. This page explains how form, overage and market labelling decide your first production run.

23 years
contract manufacturing experience
500 units
MOQ for most forms
4–6 weeks
pilot lead time after approvals
Multivitamin Manufacturer: Choose the Form, Then the Label

What a Multivitamin Factory Actually Decides With You

A buyer sourcing a multivitamin is not just picking a supplier; they are picking a dosage form and a label. The form sets your unit cost, your channel fit and your overage strategy. A tablet suits cost-sensitive retail and large bottle counts. A gummy suits DTC and subscription boxes but needs higher first runs because of cooking losses and setup. A powder stick pack suits subscription and travel packs. As a multivitamin OEM, we quote the form first, then the formula, because the same vitamin blend behaves differently in a tablet press than in a gummy cooker.

The label is the second decision. In the US, your artwork carries a Supplement Facts panel per 21 CFR 101.36 with %DV. In the EU and UK, it carries a nutrition declaration per 1169/2011 with NRV percentages per daily dose. Those are different layouts, different rounding rules and different claim language. Before you approve artwork, confirm the destination market and whether the product is a supplement or a food supplement. Regulatory status is market-dependent and can change, so verify the current requirements for your destination before printing.

Six Things That Shape Your Multivitamin Run

Form Matches Price Point
Tablets are the lowest-cost form per unit for high-count bottles. Gummies carry higher unit cost but suit DTC and subscription. Stick packs suit single-serve subscription and travel. We make all three in-house, so the form choice is a cost and channel decision, not a sourcing limitation.
Overage Protects the Claim
Vitamin overage is normal practice: actives are dosed above label claim to survive shelf life. The size of the overage depends on the vitamin and the form. Gummy cooking destroys more thiamine and vitamin C than tabletting does, so a gummy formula needs a different overage than the same blend in a tablet.
Mineral Source Changes the Pill
Carbonate, citrate and bisglycinate forms differ in elemental mineral content and bioavailability, and that changes tablet size. Iron-containing formulas need separation from other lines to avoid cross-contamination, which affects scheduling. We confirm the mineral source before the tablet weight is fixed.
Label Layout Follows the Market
US artwork uses Supplement Facts per 21 CFR 101.36 with %DV. EU and UK artwork uses a nutrition declaration per 1169/2011 with NRV percentages per daily dose. The two panels are not interchangeable. We prepare the artwork brief for the destination market you name, and you verify the final text.
Gummy Runs Need Higher MOQs
Gummies and stick packs need higher first runs than tablets or capsules because of cooking, depositing and packaging setup. Softgels can start at 1,000 pieces for a pilot. Most other forms start from 1,000 units. We confirm the MOQ for your exact form and pack before quoting.
Testing Is Per Batch
Each batch is tested by HPLC for vitamins and by ICP-MS for heavy metals and minerals, with micro testing per USP <61>/<62> equivalents. A CoA is issued per batch. Export documents include certificate of origin, health certificate and CoA, with MSDS where relevant.

Operational Detail for a Multivitamin Project

SpecDetailNotes
MOQ by formTablets and hard capsules from 1,000 units; softgels 1,000 pieces for a pilot; gummies and stick packs higher first runsConfirmed per formula and pack size before quotation
Lead time4–6 weeks for a pilot run after formula and artwork approval; sampling 7–10 daysArtwork approval includes market label review
DocumentsCoA per batch, certificate of origin, health certificate, MSDS where relevantExport documents prepared for the destination market
PackingBottles, jars, sachets and stick packs; label and packaging sourcing availablePack format affects MOQ and lead time
TestingHPLC for vitamins; ICP-MS for heavy metals and minerals; micro per USP <61>/<62> equivalentsResults reported on the batch CoA

From Brief to Pilot Run

01
Form and Market Brief
You confirm dosage form, destination market and channel. We map the label type: Supplement Facts per 21 CFR 101.36 or EU nutrition declaration per 1169/2011.
02
Formula and Overage
We set actives and overage by vitamin and form, and fix mineral sources. Iron-containing formulas are scheduled with line separation to avoid cross-contamination.
03
Sample Approval
Sampling takes 7–10 days. You approve the sample against the agreed specification before artwork is finalised.
04
Artwork and Documents
Artwork is prepared for the named market. Export documents are listed: CoA, certificate of origin, health certificate, MSDS where relevant.
05
Pilot Production
A 500-unit first run typically takes 4–6 weeks after formula and artwork approval. Each batch is tested by HPLC, ICP-MS and micro methods, and released with a CoA.

Quality and Certificates: Scope Matters

Certificates are only useful if you read the scope. We hold GMP (Intertek), ISO 9001:2015 (CQC), ISO 22000:2018 (CQC), HACCP (CQC), an NSF audit, Halal (Halal Foundation Center, line- and product-specific) and FDA facility registration verified through the US agent Registrar Corp. FDA registration is not FDA approval; dietary supplements have no pre-market approval in the US. Halal scope is line- and product-specific, so gelatin gummies differ from capsules. Verify the certificate scope against your exact product and destination market before you rely on it.

GMP (Intertek)ISO 22000:2018HACCPISO 9001:2015Halal (line-specific)FDA facility registration

Questions Brand Owners Ask

What is the MOQ for a multivitamin first run?+
Most forms start from 500 units. Softgels can start at 1,000 pieces for a pilot. Gummies and stick packs need higher first runs because of cooking, depositing and packaging setup. We confirm the MOQ for your exact form and pack size before quoting, so the number you receive is specific to your project.
How do you handle vitamin overage?+
Overage is normal practice: actives are dosed above label claim to survive shelf life. The size depends on the vitamin and the form. Gummy cooking destroys more thiamine and vitamin C than tabletting does, so the same blend needs different overage in a gummy than in a tablet. We set overage per vitamin and confirm it in the specification.
Can you supply both US and EU label artwork?+
We prepare artwork briefs for the market you name. US artwork uses Supplement Facts per 21 CFR 101.36 with %DV; EU and UK artwork uses a nutrition declaration per 1169/2011 with NRV percentages per daily dose. Regulatory status is market-dependent and can change, so you must verify the current requirements for your destination before printing.
Which form should I choose for my channel?+
Tablets are the lowest-cost form per unit for high-count bottles. Gummies suit DTC and subscription but carry higher unit cost and higher first runs. Stick packs suit single-serve subscription and travel. We make tablets, hard capsules, gummies and powder sachets/stick packs in-house, so the choice is yours to make on cost and channel fit.
How is the batch tested?+
Each batch is tested by HPLC for vitamins and by ICP-MS for heavy metals and minerals, with micro testing per USP <61>/<62> equivalents. A CoA is issued per batch. Export documents include certificate of origin, health certificate and CoA, with MSDS where relevant. We do not report test methods or limits we have not agreed in the specification.
Does FDA registration mean the product is approved?+
No. FDA facility registration is not FDA approval. Dietary supplements have no pre-market approval in the US. Our registration is verified through the US agent Registrar Corp. You remain responsible for confirming that your formula, claims and label comply with the destination market before sale.

Start With the Form and the Market

Tell us the dosage form, destination market and target pack. We will confirm MOQ, overage approach and label type, then quote a pilot run. Sampling takes 7–10 days; a 500-unit first run typically takes 4–6 weeks after formula and artwork approval.

Related Pages