Eye Health Gummies Built Around the 10:2 Ratio

Lutein and zeaxanthin are lipophilic, light-sensitive and dosed in milligrams, which makes a gummy a genuinely awkward format. Water-dispersible beadlets and an opaque pack solve most of it.

10 mg + 2 mg
Lutein and zeaxanthin
4-6 Weeks
Production lead time
3,000 Units
Minimum per SKU
Eye Health Gummies Built Around the 10:2 Ratio

Why Carotenoids Are Hard in a Chew

The reference dose for this category comes from AREDS2: 10 mg lutein with 2 mg zeaxanthin daily. Both are fat-soluble carotenoids, which in a water-based gummy means either an oil emulsion or a water-dispersible beadlet. The beadlet route is the one that survives a cook and a two-year shelf life.

Stability is the second problem. Lutein oxidises under light and heat, and it degrades faster in a high-water-activity matrix. A gummy at 0.55-0.65 water activity with an opaque, foil-lined pack keeps more of the dose than a clear piece in a clear jar, and the overage is calculated from accelerated data rather than guesswork.

Taste is manageable. At 10 mg the carotenoid load is small enough that a mango, peach or citrus base covers it. Bilberry and blackcurrant extracts at 50-100 mg are more noticeable and add a tannic edge that needs a sweetener adjustment.

Claims are narrow. Structure-function language around eye health is permitted in the US with a disclaimer; in the EU, lutein is not an authorised health claim and the copy has to describe composition rather than benefit.

What Our Eye Health Gummy Line Covers

Lutein and Zeaxanthin
10 mg and 2 mg per serving from water-dispersible beadlets, with the ratio held to AREDS2.
Meso-Zeaxanthin
Optional third carotenoid at 10 mg, common in triple-carotenoid formulas.
Supporting Actives
Astaxanthin 2-6 mg, bilberry 50-100 mg, vitamin A and zinc at levels that stay inside tolerable limits.
Opaque Packaging
Foil-lined pouches and opaque bottles specified with the formula, because the pack is part of the stability plan.

Eye Health Gummy Capability

ParameterRangeNotes
Lutein10 mg per servingWater-dispersible 5-20% beadlet
Zeaxanthin2 mg per servingHeld at the 10:2 ratio
Meso-zeaxanthin0-10 mg per servingOptional third carotenoid
Astaxanthin2-6 mg per servingOleoresin or beadlet
Gummy weight3.5-4.5 gSmall piece suits the dose
Batch size50,000-2,000,000 gummiesPilot runs from 3,000 units

From Brief to Finished Eye Gummy

01
Carotenoid Grade
We pick the beadlet load by the dose you want and the process temperature it will see.
02
Dispersion Trial
The beadlet is dispersed into the base without breaking, which is where most formulas lose assay.
03
Flavour and Colour
Mango and peach systems cover the carotenoid note; colour comes from the beadlet itself.
04
Pilot Batch
A small run checks deposit weight, lutein assay and colour consistency across the batch.
05
Stability
Samples are held at 25 °C and 40 °C under light and dark to measure carotenoid loss.
06
Production and Packing
Cooking, depositing, curing, polishing, metal detection, then packing into opaque material.

Quality Control for Eye Gummies

Lutein and zeaxanthin are assayed by HPLC on the finished gummy, and the overage is set from accelerated stability data because carotenoid loss is the limiting factor over shelf life. Water activity is checked after curing to keep the matrix dry enough for the beadlet.

The plant operates under GMP with ISO 9001, ISO 22000 and HACCP controls and is registered with the US FDA as a food facility. Heavy metals and microbiological testing run per batch, with third-party verification available.

GMPISO 9001ISO 22000HACCPFDA-registered facilityHalal

Eye Health Gummy FAQ

What ratio of lutein to zeaxanthin do you use?+
10 mg to 2 mg, the AREDS2 ratio. Formulas that add meso-zeaxanthin usually go 10:2:10 across the three carotenoids.
How do you keep lutein stable in a gummy?+
With water-dispersible beadlets, a water activity target of 0.55-0.65, and an opaque foil-lined pack. The overage is calculated from accelerated data rather than assumed.
Does lutein affect taste?+
Barely at 10 mg. Bilberry and blackcurrant extracts at 50-100 mg are more noticeable and need the sweetener adjusted.
Can the gummy be clear?+
It can, but a clear piece in a clear jar loses carotenoid faster. If the brand wants a clear gummy, the pack still has to be opaque.
Can you add astaxanthin?+
Yes, at 2-6 mg per serving. It is also a carotenoid, so it takes the same beadlet route and the same light protection.
Is a sugar-free version possible?+
Yes, with pectin and a polyol system. The lower water activity of a sugar-free piece actually helps the carotenoid.
What is the minimum order?+
3,000 finished units per SKU for a pilot. Volume pricing starts at 50,000 gummies per batch.
How long does production take?+
Four to six weeks after artwork and materials are approved, plus seven to ten days for samples at the start.

Send Your Eye Gummy Brief

Tell us the carotenoid ratio, the supporting actives and the pack format. We will confirm the beadlet grade, the water activity target and the overage the stability data supports.

Related Pages