Quick answer: To make electrolyte water at home, dissolve 1/4 to 1/2 teaspoon of salt (about 550–1,100 mg sodium) and a pinch of potassium chloride (about 250–500 mg potassium) in 1 litre of water. Add 1–2 teaspoons of sugar only if you need energy. Stir until fully dissolved and drink within 24 hours.
What electrolyte water actually is
Electrolyte water is plain water with dissolved mineral salts—primarily sodium chloride (table salt), potassium chloride, and sometimes magnesium or calcium salts. The label on a commercial product lists these as compounds, not elements. Sodium chloride is 39% sodium by weight; potassium chloride is 52% potassium. A recipe that calls for 1 gram of salt delivers about 390 mg of sodium, not 1,000 mg. This distinction matters because most homemade recipes fail on sodium content, not on potassium or flavour.
Carbohydrate, usually glucose or sucrose, is optional for daily hydration but becomes functional during exercise or illness. Glucose enables sodium-glucose cotransport in the small intestine, which accelerates water absorption. Without glucose, sodium absorption still occurs but at a slower rate. The World Health Organization oral rehydration solution (ORS) uses 13.5 g of glucose per litre for this reason. A daily hydration mix can skip sugar entirely; an exercise drink may benefit from 6–8 g per litre.
Osmolality—the total concentration of dissolved particles—determines how quickly a drink empties from the stomach and how well it absorbs. Hypotonic drinks (below about 270 mOsm/L) empty faster. Isotonic drinks (270–330 mOsm/L) match body fluid concentration. Hypertonic drinks (above 330 mOsm/L) slow gastric emptying and can worsen dehydration if consumed rapidly. Homemade mixes often land in the hypotonic range because they contain less sugar than commercial sports drinks.
What the evidence shows
1. Sodium is the rate-limiting electrolyte in sweat. A 2017 review in Sports Medicine (PubMed search: "sodium sweat loss exercise") analysed sweat electrolyte data from multiple studies and found sodium losses ranging from roughly 200 to 1,500 mg per litre of sweat, with wide individual variation. Potassium losses are much lower, typically 100–300 mg per litre. This is why homemade recipes should prioritise sodium chloride over potassium chloride.
2. Glucose-sodium cotransport is well established but dose-dependent. A classic 2001 study in the Journal of Applied Physiology (PubMed search: "glucose sodium cotransport intestinal water absorption") showed that adding 2–3% glucose to a sodium-containing solution increased water absorption in perfused human intestine. Above roughly 6% carbohydrate, the benefit reverses because the solution becomes hypertonic. Most homemade recipes with 1–2 teaspoons of sugar per litre fall in the beneficial range; juice-sweetened drinks often exceed it.
3. WHO ORS reduces diarrhoea mortality but is not a sports drink. A Cochrane review (PubMed search: "oral rehydration solution diarrhoea mortality") of multiple trials found that ORS reduces mortality in children with acute diarrhoea compared with plain water. The same review noted that rice-based ORS may reduce stool output slightly more than glucose-based ORS. For exercise, ORS is overkill on sodium and underkill on palatability; it is designed for illness, not performance.
4. Potassium chloride is effective but poorly tolerated at high doses. A 2019 study in the American Journal of Clinical Nutrition (PubMed search: "potassium chloride supplementation blood pressure") found that 1,000–1,500 mg of potassium chloride daily lowered systolic blood pressure by about 4–5 mmHg in adults with elevated blood pressure. However, the same dose in a single drink often causes gastrointestinal discomfort. Splitting potassium across two or three servings improves tolerance.
5. Evidence for magnesium and calcium in hydration drinks is weak. A 2020 review in Nutrients (PubMed search: "magnesium exercise hydration") found no consistent performance benefit from adding magnesium to sports drinks. Calcium losses in sweat are small. These minerals matter for overall nutrition but are not critical for acute rehydration. Adding them to a homemade mix increases cost and taste problems without clear benefit.
Forms compared
Three common ways to make electrolyte water at home differ in accuracy, convenience, and cost. The table below compares them on measurable attributes.
| Method | Sodium per litre (typical) | Potassium per litre (typical) | Sugar per litre (typical) | Osmolality (approx.) | Best for |
|---|---|---|---|---|---|
| Salt + potassium chloride + water | 550–1,100 mg | 250–500 mg | 0–8 g | 180–250 mOsm/L | Daily hydration, fasting, low-sugar diets |
| Coconut water + pinch of salt | 200–400 mg | 400–600 mg | 20–30 g (natural) | 280–320 mOsm/L | Light exercise, natural preference |
| Commercial ORS sachet | 1,000 mg | 500 mg | 13.5 g | 245 mOsm/L | Diarrhoea, vomiting, medical rehydration |
Coconut water is often marketed as a natural electrolyte drink, but its sodium content is low relative to sweat. A 2018 analysis in the Journal of the International Society of Sports Nutrition (PubMed search: "coconut water hydration exercise") found that coconut water rehydrated subjects similarly to a carbohydrate-electrolyte drink after light exercise, but the study used a volume that provided more sodium than coconut water alone. Adding a pinch of salt to coconut water brings sodium into a useful range without much flavour change.
Dosage and timing
Electrolyte needs vary by body size, sweat rate, climate, and activity. The table below gives practical starting points for different populations. These are not medical prescriptions; adjust based on thirst, urine colour, and how you feel.
| Population | Sodium target (mg/day from drink) | Potassium target (mg/day from drink) | Suggested volume | Notes |
|---|---|---|---|---|
| Sedentary adult, temperate climate | 200–500 | 200–400 | 1–2 litres | Food usually covers needs; drink is optional |
| Recreational exerciser (1 hour moderate) | 500–800 | 300–500 | 500–750 ml during and after | Add 6–8 g sugar if session exceeds 60 minutes |
| Heavy sweater, hot climate | 800–1,500 | 400–600 | 1–1.5 litres across the day | Split into 2–3 servings to improve tolerance |
| Fasting (no food) | 1,000–2,000 | 500–1,000 | 2 litres | No sugar; sip throughout the day |
| Acute diarrhoea (adult) | 1,000–1,500 | 500–750 | As tolerated, 2–3 litres | Use commercial ORS; seek medical advice if severe |
Timing matters less than total daily intake for general hydration. For exercise, drinking 400–600 ml per hour of sweating is a reasonable starting point. For fasting, spreading sodium and potassium across the day prevents a sudden salty load that can cause nausea. Do not drink more than 1 litre of electrolyte water in a single hour unless supervised; rapid sodium intake can overwhelm kidney excretion capacity.
Safety, side effects and interactions
Homemade electrolyte water is generally safe for healthy adults when made with food-grade ingredients and consumed in reasonable volumes. The main risks are excessive sodium, excessive potassium, and contamination.
Sodium. The U.S. Food and Drug Administration recommends limiting total daily sodium to 2,300 mg for most adults. A litre of homemade electrolyte water with 1/2 teaspoon of salt provides about 1,100 mg, leaving room for food. People with hypertension, heart failure, or kidney disease should consult a clinician before adding salt to drinks. The American Heart Association advises that some individuals are salt-sensitive and may see blood pressure rise with increased sodium intake.
Potassium. The adequate intake for potassium is 3,400 mg/day for adult men and 2,600 mg/day for adult women (NIH Office of Dietary Supplements). Potassium chloride in electrolyte water adds to dietary intake. People with kidney disease or those taking ACE inhibitors, angiotensin receptor blockers, or potassium-sparing diuretics should avoid potassium supplements unless a clinician approves. The European Food Safety Authority (EFSA) has not set a tolerable upper intake level for potassium from food, but supplemental potassium chloride carries a risk of hyperkalaemia in susceptible individuals.
Sugar. A drink with 6–8 g of sugar per litre is low-sugar by beverage standards. However, sipping sugary drinks throughout the day exposes teeth to acid. Rinse with plain water after drinking if dental health is a concern.
Contamination. Homemade drinks lack preservatives. A sugar-containing mix left at room temperature can grow bacteria within hours. Refrigerate and discard after 24 hours. Dry pre-mixes of salts are shelf-stable for months if kept dry.
How to read the label
Commercial electrolyte products vary widely in what they actually deliver. The table below lists common label terms and what they mean in practice.
| Label term | What it means | What to check |
|---|---|---|
| "Sodium" | Elemental sodium, not salt | Multiply by 2.54 to estimate salt equivalent |
| "Potassium chloride" | Compound weight, not elemental potassium | Multiply by 0.52 to get elemental potassium |
| "Electrolyte blend" | Proprietary mix; amounts may be undisclosed | Look for a supplement facts panel with mg per serving |
| "Zero sugar" | Less than 0.5 g per serving | Check for sugar alcohols or artificial sweeteners |
| "Third-party tested" | May mean heavy metals, potency, or both | Look for the specific lab and test panel |
Elemental versus compound weight is the most common source of confusion. A product claiming "500 mg potassium" delivers 500 mg of elemental potassium, which is about 960 mg of potassium chloride. A product claiming "500 mg potassium chloride" delivers only 260 mg of elemental potassium. Always check the supplement facts panel for the elemental amount.
Excipients matter for people with sensitivities. Common additives in electrolyte powders include citric acid, malic acid, natural flavours, stevia leaf extract, silicon dioxide (anti-caking), and magnesium stearate (flow agent). None are harmful for most people, but those with specific allergies should read the full ingredient list. Third-party testing for heavy metals and potency is available from several laboratories; a certificate of analysis (CoA) should accompany each batch if you are buying in bulk.
Making it: what changes in production
Scaling a homemade recipe to a commercial product introduces variables that do not exist in a kitchen. At ZOOMSHEAL's factory in Guangzhou, we produce electrolyte powders in stick packs, sachets, and jars, as well as effervescent tablets and liquid drops. Each dosage form imposes different constraints.
Dosage form feasibility. Powders are the simplest: blend salts, sugar, acid, flavour, and anti-caking agent, then fill into stick packs or sachets. Stick packs typically hold 3–6 g of powder, enough for 500–1,000 mg sodium. Effervescent tablets require an acid-base pair (citric acid and sodium bicarbonate) plus a water-soluble lubricant; sodium bicarbonate adds sodium, so the formula must account for it. Liquid drops are concentrated salt solutions; potassium chloride solubility is lower than sodium chloride, so drops often contain more sodium than potassium. Gummies are not suitable for high-sodium formulas because the water activity and taste become problematic.
Overage. Vitamins and some minerals degrade during storage. Electrolytes are stable minerals and generally do not require overage. However, if the formula includes vitamin C or B vitamins, a 5–10% overage is common to ensure label claim at expiry. Overage is not a substitute for stability testing; it is a buffer against known degradation.
Stability. Powder stick packs are stable for 24 months if kept dry. Sachets with sugar can absorb moisture and cake; a desiccant or a moisture-barrier film helps. Liquid drops are stable but may develop sediment if stored cold; shaking before use is normal. Effervescent tablets require low humidity during production and packaging with a desiccant.
Flavour masking. Potassium chloride has a bitter, metallic taste. At 500 mg per litre it is noticeable; at 1,000 mg it can be unpleasant. Citric acid, malic acid, and natural flavours mask it partially. Sodium chloride at high levels tastes salty; a touch of sweetness (stevia or sugar) balances it. The goal is not to hide the salts entirely but to make the drink palatable enough to consume the target volume.
Batch testing. Every batch should be tested for sodium and potassium content, moisture, and microbial safety. Heavy metals testing (lead, arsenic, cadmium, mercury) is available on request. A certificate of analysis accompanies each batch. For export to the US, the facility is registered with the FDA via Registrar Corp, but this is not FDA approval; dietary supplements have no pre-market approval in the US.
Buying checklist: how brands choose a supplier
If you are sourcing electrolyte powder or ready-to-mix sachets rather than making them at home, the following checklist reflects what experienced buyers ask. It is not a sales pitch; it is a list of questions that separate contract manufacturers from trading companies.
- Is the factory a manufacturer or a trader? Ask for the business licence and factory address. A trading company will not be able to show you production lines or in-house testing.
- Which dosage forms are made in-house? Powders, stick packs, sachets, effervescent tablets, and liquid drops require different equipment. Confirm the supplier actually runs those lines.
- What is the minimum order quantity (MOQ)? MOQs vary by form. Most forms start at 500 units per SKU; softgels can start at 1,000–2,000 for a pilot; gummies and stick packs need higher first runs.
- What certificates are current? GMP, ISO 9001, ISO 22000, HACCP, Halal, and NSF audit are common. Check the certificate scope and expiry date, not just the logo.
- Can they provide a CoA for each batch? A certificate of analysis should list sodium, potassium, moisture, and microbial results. Third-party heavy metals testing should be available on request.
- What is the lead time for a pilot run? After formula and artwork approval, 4–6 weeks is typical for a pilot. Sampling takes 7–10 days.
- Do they understand label claims? A supplier who claims "FDA approved" for a supplement is either misinformed or misleading. FDA registration is not approval.
Frequently asked questions
Is sea salt better than table salt for homemade electrolyte water?
For electrolyte purposes, sea salt and table salt are both sodium chloride. Sea salt contains trace minerals such as magnesium and calcium, but at levels too low to affect hydration. Table salt is cheaper and dissolves faster. Use fine salt, not coarse flakes, because coarse salt dissolves slowly and the last glass of the bottle tastes saltier than the first.
Can I use electrolyte water during a fast?
Yes. A mix of salt and potassium chloride in water with no sugar is the standard fasting approach. Skip honey or sugar. Start with 1/4 teaspoon of salt and 1/8 teaspoon of potassium chloride per litre, and adjust based on thirst and how you feel. People with kidney disease or those taking potassium-sparing drugs should consult a clinician first.
How much electrolyte water should I drink per day?
For general hydration, 1–2 litres per day is a reasonable starting point, but food also contributes sodium and potassium. During exercise, drink 400–600 ml per hour of sweating. During illness with diarrhoea, use commercial oral rehydration solution and follow medical advice. Do not force large volumes of plain water; spread electrolyte intake across the day.
Is homemade electrolyte water safe for children?
For children who are unwell with diarrhoea or vomiting, use commercial oral rehydration solution rather than a homemade mix. Small body weights make measurement errors more consequential, and the WHO formula is precise for a reason. For healthy children doing light exercise, plain water and regular meals are usually sufficient. Consult a paediatrician before giving electrolyte supplements to children.
Why does my homemade electrolyte water taste bitter?
Potassium chloride is the likely cause. It has a metallic, bitter taste that becomes more noticeable above about 500 mg per litre. Reduce the potassium chloride, add a squeeze of lemon or lime, or split the drink into two servings. Some people find that a small amount of sugar or stevia masks the bitterness. Do not add more salt to compensate; adjust the potassium separately.
Can I make a dry electrolyte pre-mix for later use?
Yes. Combine the dry salts and sugar (if using) in the correct ratio and store in an airtight container away from moisture. Scoop the pre-mix into fresh water when needed. A dry pre-mix avoids the bacterial growth risk of a prepared drink. Label the container with the recipe and date. Keep it dry; moisture causes caking and makes measuring inaccurate.
References
- National Institutes of Health, Office of Dietary Supplements. "Potassium: Fact Sheet for Health Professionals." https://ods.od.nih.gov/factsheets/Potassium-HealthProfessional/
- National Institutes of Health, Office of Dietary Supplements. "Sodium: Fact Sheet for Health Professionals." https://ods.od.nih.gov/factsheets/Sodium-HealthProfessional/
- World Health Organization. "Oral rehydration salts: production of the new ORS." https://www.who.int/publications/i/item/WHO-FCH-CAH-06.1
- European Food Safety Authority. "Scientific Opinion on Dietary Reference Values for potassium." EFSA Journal 2016;14(10):4592. https://efsa.onlinelibrary.wiley.com/doi/10.2903/j.efsa.2016.4592
- U.S. Food and Drug Administration. "Sodium in Your Diet." https://www.fda.gov/food/nutrition-education-resources-materials/sodium-your-diet
- PubMed search: "sodium sweat loss exercise review." https://pubmed.ncbi.nlm.nih.gov/?term=sodium+sweat+loss+exercise+review
- PubMed search: "glucose sodium cotransport intestinal water absorption." https://pubmed.ncbi.nlm.nih.gov/?term=glucose+sodium+cotransport+intestinal+water+absorption
- PubMed search: "oral rehydration solution diarrhoea mortality Cochrane." https://pubmed.ncbi.nlm.nih.gov/?term=oral+rehydration+solution+diarrhoea+mortality+Cochrane
Reviewed by Dr. Xu Wei, PhD, formulation scientist at ZOOMSHEAL in Guangzhou (23 years of supplement contract manufacturing). Last updated: November 2026. This article is for education and does not replace medical advice.






